End-to-end coverage
End-to-endOne brief, one schedule, one point of contact — from requirement study to on-time shipment.
UN / 01 Turnkey injection molding · Equipment + Molds + Auxiliaries
The whole line,
one partner.
Unisys integrates injection molding machines, molds and auxiliaries into one production-ready system — configured for your product, proven before shipment, and started up in your plant.
Five product families
One contract · One schedule
30–50%Cycle
Shorter project cycle
15–25%Cost
Lower procurement cost
>80%Risk
Lower cooperation risk
100%Pass
Acceptance, last three years
01 Positioning
More than equipment.
We are the integrator.
A press, a mold and a robot bought separately still leave you to make them work together. We specify all three as one system — matched to your product, your material and your market — and stay accountable until the line is running.
That is what turnkey means here: one brief, one schedule, one team answering for the outcome.
Turnkey configuration
TurnkeyMachine, mold, auxiliaries and automation delivered as a production-ready system — not a pile of purchase orders.
Data-driven decisions
DataEvery recommendation is tied to cycle time, output, energy and cost — measured, not estimated.
R / 01
Right vendorScreened for service and fit
R / 02
Right machineSized to the part and the mold
R / 03
Right solutionOne system, not five quotes
R / 04
Right costPriced as a project, not a list
02 Five production systems
Five products.
Five complete systems.
Each system is configured around a product family — the machine, the mold and the auxiliaries are chosen together, and the interfaces are resolved before anything is ordered.
Explore all five systems
Fig. 01 / PET
P / 01Liquid packaging
PET preform system
High-speed injection, multi-cavity tooling and a drying-to-robot chain sized around cost per preform — not tonnage.
Same output, 80% of the investment
Fig. 02 / THIN-WALL
P / 02Rigid packaging
Thin-wall packaging system
Containers, lids and cups where a fraction of a second decides the margin. Tuned around cycle time and consistent wall sections.
Short cycle, lower unit cost
Fig. 03 / PALLET
P / 03Logistics
Pallet system
Large parts and regrind-heavy recipes, engineered down to a cost per pallet.
80% regrind, automated
Fig. 04 / PAIL
P / 04Industrial packaging
Paint pail system
Sealing designed into the mold and verified on every pail before it ships.
Zero leakage at the gate
Fig. 05 / CABLE TIE
P / 05Consumables
Cable tie system
High-cavity tooling and an automated downstream that runs without operators.
Resin in, counted bags out
03 Proven by data
Claims are easy.
Numbers are not.
We track the three things that decide whether a project was worth doing: how long it took, what it cost, and whether it worked on the first try.
Figures are from representative projects. Results depend on part design, material, mold and machine configuration.
30–50%
Project cycle
Shorter projects, one interface
Machine, mold and auxiliaries are planned by one team, so decisions do not wait on three suppliers.
Pallet project: brief to shipment in 45 days15–25%
Procurement cost
Lower total cost
Supply-chain leverage and design optimization are negotiated as one package, not line by line.
Beverage preform line: 22% saved>80%
Risk reduction
Fewer surprises
Suppliers are screened and the line is assembled and tested before shipment. You approve samples and data, not promises.
100% acceptance over the last three years04 Selected projects
Running in production.
Not in a brochure.
Three lines, three product families, three different definitions of success.
Read the case studies
Beverage
PET preform line
Liquid packaging · high volume
7.6 sCycle time
100k+Preforms a day
−25%Energy use
Logistics
Pallet automation
Heavy parts · recycled material
75 sPer pallet
80%Regrind content
45 dBrief to shipment
Chemical
Paint pail line
Industrial packaging · leak critical
100%Acceptance rate
ZeroLeakage
−60%Labor cost
05 How we deliver
From your product
to your plant.
A turnkey project is mostly interface work. We plan the handoffs — material, robot signals, water, air, power, documentation — before they become site problems.
See how we workProcess map / 05 steps
45DAYS
Brief to shipment
pallet project
pallet project
100%
Pre-acceptance
before shipment
before shipment
-
01
Brief & product study
We start with the part: material, wall thickness, cycle target, annual volume and plant conditions.
-
02
System configuration
Machine, mold and auxiliaries are sized together, with the interface risks resolved on paper first.
-
03
Supplier & cost engineering
We match each module to the right vendor and price it as one system, not five separate quotes.
-
04
Pre-acceptance
The line is assembled, run and inspected before shipment. You approve the samples and the data.
-
05
Shipment & start-up
Documentation, packing, shipping and remote or on-site commissioning follow one schedule.
Start with a part
Send us the part.
We will send back a plan.
A drawing, a sample photo or a one-page brief is enough. We will come back with a configuration, an indicative budget and a delivery window.